ATV61HD30Y Schneider Electric Variable Frequency Drives (VFD)

Schneider Electric ATV61HD30Y Schneider Electric ATV61HD30Y is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage range of 425-759Vac, including nominal voltages of 480Vac, 500Vac, 600Vac, and 690Vac. It features variable speed/frequency drive capabilities with U/F ratio customization (2 points / 5 points / energy saving), sensorless flux vector control, and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. The design incorporates a built-in EMC filter (class C3), a built-in heatsink, and a coated version for enhanced chemical resistance. The ATV61HD30Y offers an IP20 UL type 1 degree of protection and has dimensions of H420mm x W240mm x D236mm. It supports a rated current of 35A at 500Vac and 690Vac, 32A at 575Vac with a 42A max current capability for 60 seconds. Wall mounting is the prescribed mounting mode. Communication is facilitated through Modbus and CANopen protocols. The output network frequency ranges from 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source), an additional programmable digital input, and a PWR safety input, along with 2 digital outputs. Analog inputs include 1 for -10...+10Vdc and another for 0-10Vdc / 0-20mA signals. Current consumption is specified at 33A for 500Vac, 28A for 600Vac, and 34A for 690Vac, with a rated active power of 30kW at 690Vac and 22kW at 500Vac, equivalent to 30HP.
Schneider Electric

Part#:ATV61HD30Y

Manufacturer:Schneider Electric

Product Lifecycle:Active

Get a quick Quote!

Schneider Electric ATV61HD30Y is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage range of 425-759Vac, including nominal voltages of 480Vac, 500Vac, 600Vac, and 690Vac. It features variable speed/frequency drive capabilities with U/F ratio customization (2 points / 5 points / energy saving), sensorless flux vector control, and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. The design incorporates a built-in EMC filter (class C3), a built-in heatsink, and a coated version for enhanced chemical resistance. The ATV61HD30Y offers an IP20 UL type 1 degree of protection and has dimensions of H420mm x W240mm x D236mm. It supports a rated current of 35A at 500Vac and 690Vac, 32A at 575Vac with a 42A max current capability for 60 seconds. Wall mounting is the prescribed mounting mode. Communication is facilitated through Modbus and CANopen protocols. The output network frequency ranges from 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source), an additional programmable digital input, and a PWR safety input, along with 2 digital outputs. Analog inputs include 1 for -10...+10Vdc and another for 0-10Vdc / 0-20mA signals. Current consumption is specified at 33A for 500Vac, 28A for 600Vac, and 34A for 690Vac, with a rated active power of 30kW at 690Vac and 22kW at 500Vac, equivalent to 30HP.

About the manufacturer: Schneider Electric is one of the manufacturers that offers Variable Frequency Drives (VFD) that you can order at marketplace.quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.

Check out the ATV61HD30Y Schneider Electric price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

ATV61HD30Y Description

Schneider Electric ATV61HD30Y is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for three-phase networks with a supply voltage range of 425-759Vac, including nominal voltages of 480Vac, 500Vac, 600Vac, and 690Vac. It features variable speed/frequency drive capabilities with U/F ratio customization (2 points / 5 points / energy saving), sensorless flux vector control, and vector control without speed feedback, capable of delivering 120% of the nominal motor torque. The design incorporates a built-in EMC filter (class C3), a built-in heatsink, and a coated version for enhanced chemical resistance. The ATV61HD30Y offers an IP20 UL type 1 degree of protection and has dimensions of H420mm x W240mm x D236mm. It supports a rated current of 35A at 500Vac and 690Vac, 32A at 575Vac with a 42A max current capability for 60 seconds. Wall mounting is the prescribed mounting mode. Communication is facilitated through Modbus and CANopen protocols. The output network frequency ranges from 0.1-599 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source), an additional programmable digital input, and a PWR safety input, along with 2 digital outputs. Analog inputs include 1 for -10...+10Vdc and another for 0-10Vdc / 0-20mA signals. Current consumption is specified at 33A for 500Vac, 28A for 600Vac, and 34A for 690Vac, with a rated active power of 30kW at 690Vac and 22kW at 500Vac, equivalent to 30HP.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schneider Electric

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schneider Electric Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

ATV630D18M3 Part Image. Manufactured by Schneider Electric.

ATV630D18M3

Verified stock: 0

Schneider Electric ATV630D18M3 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct access to system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The ATV630D18M3, ATEX compliant, operates on a supply voltage of 170-264Vac, with dimensions of H673mm x W226mm x D271mm, and an IP21 UL type 1 degree of protection. It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet communication protocols on a 3-phase network with an output frequency of 0.1-500 Hz. The drive has two analog outputs (0-10Vdc / 0-20mA), six digital inputs with specific functionalities including STO, and three digital outputs. It also includes three analog inputs compatible with various signal types. The rated current is 78.4A for normal-duty and 63.4A for heavy-duty operations at 4kHz, with maximum currents of 86.2A and 95.1A respectively for short durations. The rated active power is 18.5kW for normal-duty and 15kW for heavy-duty, corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV630U30M3 Part Image. Manufactured by Schneider Electric.

ATV630U30M3

Verified stock: 0

Schneider Electric ATV630U30M3 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series designed for variable and constant load torque applications. It features STO (Safe Torque Off up to SIL3), optimized torque mode for PM (permanent magnet) motors, sensorless estimated flow rate, and accurate measurement including installation energy drift detection. This model is ATEX compliant, operates on a supply voltage of 170-264Vac, and offers dimensions of H350mm x W144mm x D203mm with an IP21 UL type 1 degree of protection. It supports a rated current of 13.7A in normal-duty at 4kHz and 11.2A in heavy-duty at 4kHz, with maximum currents of 15.1A (normal-duty; for 60s) and 16.8A (heavy-duty; for 60s) respectively. Wall mounting is the prescribed mounting mode. Communication is facilitated through Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency range of 0.1-500 Hz. It includes 2 analog outputs, 7 digital inputs with programmable and pulse input options, and 3 digital outputs. The analog inputs are versatile, supporting multiple signal types. The current consumption varies with voltage and duty, and the rated active power is 3kW for normal-duty and 2.2kW for heavy-duty, equivalent to 3HP in heavy-duty applications.

Schneider Electric

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo

Save time searching for competitively priced automation parts. Search, find, and get the parts you need shipped to keep your projects on track.

Copyright @ 2026 Quotebeam

Quotebeam Inc., 166 Geary St, STE 1500, San Francisco, CA 94108

(747) 302-4552

[email protected]
VisaMastercardAmerican Express
follow us on
VisaMastercardAmerican Express

Disclaimer: Quotebeam is a platform that brings products from many supply chain channels to one place to help customers source their parts without endless searching on the web. Our products are never used surplus, and are mainly overstock from other suppliers in the industry. Quotebeam is not an authorized distributor, authorized reseller, affiliate or representative for the manufacturers listed and products featured on this website. All product names, designated trademarks, brand names, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holders.

Product Disclaimer: The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be from an earlier series than what is available directly from the manufacturer or its authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply to this product. Quotebeam offers limited warranty for this product, which is not to be mistaken with the manufacturer warranty. While many Controls products will have firmware already installed, Quotebeam makes no representation as to whether the Control product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from the manufacturer, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware. Customer acknowledges and agrees that Quotebeam does not provide any operating system software or software right-to-use licenses with the products it sells.